Page 56 - Plastic News November 2023
P. 56

TECHNOLOGY






          Wittmann Battenfeld to present its new EcoPower B8X at Fakuma 2023

                                                                                 The  company claims  that  the  toggle
                                                                                 lever of the new EcoPower B8X has
                                                                                 been kinematically optimized. By this
                                                                                 move, the force required for clamp-
                                                                                 ing force build-up has been reduced
                                                                                 by 15 %, which has reduced stress on
                                                                                 the  servo motors and consequently
                                                                                 led to a further reduction of the en-
                                                                                 ergy consumption. It also enables
                                                                                 a higher level of dynamism with the
                                                                                 result of better dry cycle times. The
                                                                                 highly dynamic toggle lever in combi-
                                                                                 nation with the accelerated speed of
                                                                                 the injection units and the option for
                                                                                 parallel movements included as stand-
               ITTMANN        BATTENFELD     injection  speed.  Secondly,  the  injec-
          Wwill present its new EcoPower  tion unit has been technologically fur-  ard enables minimal cycle times, thus
                                                                                 increasing the machine’s profitability.
          B8X to trade visitors at Fakuma 2023  ther optimized. For instance, the in-  To extend the toggle  lever’s service
          from October 17 to October 21 at  jection spindle is oil-lubricated instead   life, the crosshead guides have been
          its booth 1204 in hall B1. In compari-  of grease-lubricated,  thus increasing   reinforced, and new hard bronze con-
          son to its predecessor, the company  its  dynamism  by  reducing  frictional
          claims  that  this new  machine  stands  resistance.  In  combination  with  ad-  nectors with a special alloy have been
                                                                                 installed, as well as larger toggle bolts
          out by even greater energy efficiency,  ditional injection unit sizes, this has a   for better  force  distribution  among
          an extended  range  of injection  units  positive effect on the energy balance.   the bearing positions.
          and higher precision with an ‘innova-  The number of different lubricants re-
          tive’ drive system.                quired has also been reduced.       The B8X control system of the new
          High  performance and repeatability  In addition to this, the injection unit of   EcoPower B8X comes equipped with
                                                                                 control  system  components  devel-
          with simultaneous low energy con-  the EcoPower has been harmonized    oped in-house. Particularly notewor-
          sumption have always been a hallmark  with that of the SmartPower. The in-  thy  here  is  the  X4  booster  for the
          of the  machines  from WITTMANN  jection unit is now pivotable, which
          BATTENFELD,  and in this case es-  significantly  facilitates  barrel  change.   drive units, which has been directly
          pecially of the EcoPower. At  Fakuma  Fore even more service friendliness,   adapted to the servo motors installed
                                                                                 in the machine and permits a higher
          2023,  WITTMANN  BATTENFELD  the injection unit has been equipped      internal  clock frequency  sampling
          will present for the first time its new  with a sum connector for the heat-  rate,  consequently  shorter  response
          EcoPower B8X, which offers several  ing system including screw coding, to
          advantages  in addition to a further  ensure the additional advantage of a   times to sensor signals and thus higher
          reduction of its energy consumption  faster and faultless barrel change. The   repeatability, while  user friendliness
                                                                                 and familiar visualization remain un-
          compared to the previous version.  sum connector automatically calcu-  changed.
          In its further development of the Eco-  lates the screw diameter. All electric
          Power, special attention has been paid   components of the barrel heating sys-  The new EcoPower B8X will be avail-
          to the injection unit. Firstly, a finer gra-  tem are located in the control cabinet,   able  for the  European market  from
                                                                                 the  Fakuma 2023 onwards in the
          dation of injection unit sizes has been   to provide easier access to the com-  clamping force sizes from 550 to 1800
          introduced.  This  enables  customers   ponents than would be possible if they   kN, and with volumes ranging from
          to  adjust  their  machine  more  accu-  were installed in prefabricated heater
          rately to their needs with the result of   boxes. A separate plug-in addition to   10.8 cm3 to 778 cm3. The sizes up
          a cost advantage. Some of the injec-  the sum connector has been installed   to 5500 kN with volumes up to 3012
                                                                                 cm3 are still  on offer in the current
          tion units are also available in a Plus   for the nozzle heater, to facilitate the   version.At the Fakuma, an EcoPower
          version, which means with twice the   exchange of the nozzle heater band.



          56   PLASTICS NEWSASTICS NEWS                                                             November 2023
          56 PL
   51   52   53   54   55   56   57   58   59   60   61