Page 22 - Plastics News September 2016

INTERVIEW
The 10 edition of Plastivision India 2017 event is to be held
during 19-23 January 2017 in Mumbai. For this issue we
have Mr. Kailash B. Murarka, Chairman, PLASTIVISION INDIA 2017
to discuss about the trade show in detail with Plastics News.
Speaking about PLASTIVISION INDIA 2017 Mr. Murarka reiterated
that the prime objective of creating PLASTIVISION INDIA is to help
AIPMA members and its af?liated associations spread across India
with technical knowhow, networking, business opportunities,
job creation and placement opportunities in industry, and in
understanding global trends and technological developments,
promotion of State Level Plastic Parks.
Excerpts of the interview
Why should one participate in PLASTIVISION INDIA 2017?
PLASTIVISION INDIA 2017 aims to provide end to end solution
to its exhibitors, visitors, and industry stake holders. We are
taking all out efforts to woo investors from different industries to
invest in this sunrise industry which is growing at a phenomenal
rate. Prime objective is offering service to AIPMA members and
plastic industry in its 10th edition of PLASTIVISION INDIA 2017.
If you could tell about exhibitors participating in this edition..
PLASTIVISION INDIA normally attracts exhibitors and visitors
from across all industries with participation also coming from
Automation and Robotics, Agriculture, Solar, Green and Waste
Management, Recycle, Finished Products, Die & Mold, Raw
Materials etc. In the current edition we have reached out to
new areas of support and service sectors such as Finance and
Insurance, Real Estate and Property.
We could talk in terms of numbers?
Yes, we have more than 1500 exhibitors from more than 25
countries apart from business delegations from EU, China, Japan,
Taiwan, France, Italy, Thailand, Indonesia, Iran, participating in
this event. It is the best place to gain industry insight, generate
sales leads, and keep up to date with the latest plastic industry
trends.
K2016 show is to be held from 19-26 October, 2016 in
Dusseldorf. For this issue we have Mr. Mayhur D. Shah,
Chairman, K 2016 Delegation Committee to discuss about the
delegation in detail with Plastics News.
Speaking about K 2016 Mr. Mayhur D. Shah reiterate that the
prime objective of creating Delegation to K is to help AIPMA
members and its af?liated associations spread across the world
with technical knowhow, networking, business opportunities, in
industry, and in understanding global trends and technological
developments, etc.
Excerpts of the interview
• How will AIPMA Delegation bene?t visitors?
This is a very important and Number One exhibition in the
world, wherein largest products, technologies is displayed
which will a link to connect to various technologies of different
countries participating in the Show and travelling with AIPMA
Plastics News | S e p t e m b e r 2 0 1 6 22
How it will bene?t visitors?
Visitors will be the biggest bene?ciaries Mr. Kailash B. Murarka
of this mega event by way of technical, Chairman,
mechanical, and digital use in machinery
and system. Visitors will witness all latest Plastivision India 2017
developments in industry under one roof,
source new distributors, agents,
manufacturers, direct interaction
with top decision makers, and stay
tune with new trends.
What numbers are you expecting at the trade show?
We expect about more than150000 of visitors over the 5 days of
the trade fair and I am sure this would surpass earlier records
of footfalls for any plastic exhibitions in India.
Would this mean we are expecting larger business transactions?
Absolutely, there is no doubt about it. Just by sheer numbers the
amount of business that will go through will be in Two thousand
crores at least
What are the new sectors that are likely to be at the PVI 2017?
There are many but sectors like Bio-degradable plastics,
Recycling and Energy saving technologies is for sure along with
3D, Composite, Plastic in Printing & Packaging, Auto & Recycling
sector and Robotics. Also much advancement has been made
in Polymer and Plastic Compounds and its applications are
widespread. We want to show to visitors how better material
can lead to higher yield and optimum use of their machinery.
Would you like to persuade those who’ve not yet made their
mind?
Yes, but stall space is sold out, we have started maintaining
waiting list. However I would request visitors, including those
?rst timers, to plan a trip for at least 3 days so that they
get adequate time for understanding business, networking.
Exhibitors will have several demos and new technology that
would require time to ensure that one visit all these halls.
will have a strong network to create a
business atmosphere as there will be
AIPMA Members, Associations, etc
• What numbers are you expecting
at the trade show?
From India it should be appx. 8000
delegates as per the data received
from travelling agencies.
• Would you like to persuade those Mr. Mayhur D. Shah
who’ve not yet made their mind? - Chairman
Yes, we would like to persuade to K 2016 Delegation
those who have not make their mind
and plan a trip for at least 3 days so
that they get adequate time for understanding business,
networking. Exhibitors will have several demos and new
technology which will be a good network with strong view
to connect to the plastic industry.