Page 32 - Plastics News March 2017

FEATURES

New inline edge trim granulator New machine launch conical

pan mixer
IMCo is proud to
Pintroduce New Inline
edge trim Granulator Series IMCo has introduced
PRP for recovery Edges, PNew series of Mixer
trims, reels of thermo named the Conical Pan
plastic in line, in a closed Mixer. This series of Mixers
cycle with extrusion plants are very compact and
or discontinuously from space saving, runs on low
Bobbins of film scrap of any power i.e. Power saving,
width and diameter, in the easy charging of material for mixing from front Top
compacted granules and and easy discharge of material at the bottom to avoid
easy recycling. spillage of material. Efficient and homogenous mixing
of raw material with colour Pigments or Master batch.
RECOVERY IN LINE: - Closed loop, immediately brings Machine is fitted with timer for auto stop after mixing is
to extrude the compacted resin perfectly clean and dry, done. This mixer is available in capacity of 50kgs/batch
using pneumatic conveying eliminating any possibility of to 200kgs /batch.
contamination.
Special Features:-
RECOVERY OFF LINE: - with the material on Bobbins /
Rolls the edge trim Granulator recover coils of scrap films  Efficient Pigment & Master batch mixing.
of varying thickness, width & diameter.  S.S. mixing Chamber.

The PIMCo PRP series granulator special features: -  Provided with Auto stop timer built in control box.
 Safety device with Guard.
 Densified chips are immediately recycled without risk
of contamination  Easy charging & discharging of material.
 In-Lines & off-line process.

 No colour degradation or secondary heat generation. URGENTLY FOR SALE
 Immediate re-use of edge trims without the need if E
storage or handling.
 Low energy consumption. IBM – 35 INJECTION BLOW
MOLDING MACHINE IN
 A.C. Drive control system to match line speed.
 Suitable for RPVC, PET, PS, HDPE, PP etc., MUMBAI

For further Details Please contact

PIMCO MACHINES PVT. LTD. Made in China: Year 2009
A-28, Nanddham Estate, Marol,
Andheri (East), Mumbai-400 059. E
Mobile: N. Chandrakant-+91-9820083377/
Vinay-+91-9820324007/Vipul-+91-9825176049 Machine in good condition & rarely used
Phone: +91-22-66955591 / 92 / Fax: +91-22-2920 0351 with bottle printing machine also
EMAIL: sales@pimcomachine.in, Contact:
pimco@vsnl.com, pimco@hathway.com 9869578022 / 9323471106 / 9869368110
WEBSITE: www.pimcomachine.in, www.pimcomachine.com

Plastics News | March 2017 32