Page 57 - Plastics News April 2021

notiFiCAtion

8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]

सारणी
माल या र्स्ट्तुएं भारतीय मानक भारतीय मानक के जलए
नाम

(1) (2) (3)
मौलल्डंग और एक्स्ट्ूिन के जलए पॉलीएजर्लीन आईएस 7328:2020 मौलल्डंग और एक्स्ट्ूिन के जलए
मटीररयल पॉलीएजर्लीन मटीररयल
(i) लो डेजटसटी पॉलीएजर्लीन (एल डी पीई) की जर्जनदेि
(ii) लीजनयर लो-डेजटसटी पॉलीएजर्लीन (एल एल
डी पीई)

(iii) हाई डेजटसटी पॉलीएजर्लीन (एच डी पी ई)
[िा . सं. पीसी-II 46016/6/2020-टेक. सीपीसी-भाग-1)]

कािी नार् झा, संयुक्त सजचर्
ORDER
New Delhi, the 15th April, 2021
S.O. 1625(E). — In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act,
2016 (11 of 2016), (hereinafter referred to as the said Act), the Central Government, being of the opinion that it is
necessary or expedient so to do in the public interest after consultation with the Bureau of Indian Standards,
hereby makes the following order, namely:-
1. Short title, commencement and application. – (1) This order may be called the Polyethylene Material for
Moulding and Extrusion (Quality Control) Order, 2021.
(2) It shall come into force on the expiry of one hundred and eighty days from the date of its publication in the
Official Gazette.
(3) It shall apply to goods or articles specified in column (1) of the Table below, but shall not apply to such goods
or articles meant for export.
2. Conformity to standards and compulsory use of Standard Mark. - Goods or articles specified in column (1)
of the Table below shall conform to the corresponding Indian Standard given in column (2) of the said Table and
shall bear the Standard Mark under a licence from the Bureau of Indian Standards as per Scheme-I of Schedule-II
of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
3. Certification and enforcement authority. - The Bureau of Indian Standards shall be the certifying and
enforcing authority in respect of the goods or articles specified in column (1) of the Table.
4. Penalty for contravention. - Any person who contravenes the provisions of this order shall be punishable
under the provisions of the said Act.
TABLE
Goods or article Indian Standard Title for Indian Standard

(1) (2) (3)
Polyethylene Material for moulding and IS 7328:2020 Specification of Polyethylene
extrusion Material for Moulding and Extrusion
(i) Low Density Polyethylene (LDPE)
(ii) Linear Low-Density Polyethylene
(LLDPE)
(iii) High Density Polyethylene (HDPE)

[F. No. PC-II 46016/ 6/2020-Tech.CPC – Pt-1]
KASHI NATH JHA, Jt. Secy.

57 April 2021 Plastics News